FitMaster Suspension Systems Product Match

2026 Ford E350 Class A

Quick Menu

A Anti-Sway Bar Info

B Steering Stabilizers

C TruTrac

AAnti-Sway Bar Info

Learn more about our Anti-Sway Bars

Controlling sway helps stabilize a vehicle's side-to-side motion and gives maneuverability when cornering. If you are only installing one bar, it is recommended to start with a rear anti-sway bar.

Front

Front sway bar 1 3/8 diameter with endlinks for Thor Axis and Vegas models only.

Instructions:	PDF
Additional info:	Class A
Vehicle type:	Class A
Drilling required:	no
Replace OEM bar:	yes
Installation time:	1 hr

Front sway bar 1 3/8 diameter without endlinks for Thor Axis and Vegas models only.

Instructions:	PDF
Additional info:	Class A
Vehicle type:	Class A
Drilling required:	no
Replace OEM bar:	yes
Installation time:	1 hr

Rear

Rear sway bar: 1 5/8 diameter with upgraded end-link kit for vehicles without auto chains only.

Instructions:	PDF
Additional info:	EV Type 3
Vehicle type:	Cutaway/Van
Drilling required:	yes
Replace OEM bar:	yes
Installation time:	1 hr

Notes:

Will work on the new 6 liter diesel engine for E450 chassis 1997-on. Mounts to axle same as factory bar.

Rear sway bar: 1 5/8 diameter for vehicles without auto chains only.

Instructions:	PDF
Additional info:	EV Type 3
Vehicle type:	Cutaway/Van
Drilling required:	yes
Replace OEM bar:	yes
Installation time:	1 hr

Rear sway bar: 1 1/2 diameter. This bar is for use by emergency vehicles without auto chains and Thor Axis and Vegas models only.

Instructions:	PDF
Additional info:	EV Type 3
Vehicle type:	Cutaway/Van
Drilling required:	yes
Replace OEM bar:	yes
Installation time:	1 hr

Notes:

Will work on the new 6 liter diesel engine for E450 chassis 1997-on. Mounts to axle same as factory bar.

Subcomponents

— No results. —

BSteering Stabilizers

Learn more about our Steering Stabilizers

Roadmaster steering stabilizers provide an immediate and dramatic improvement in handling and control. Please note: A complete Steering Stabilizer system consists of a mounting kit and the stabilizer unit. Be sure to order both. The part numbers are shown below.

For models with OEM steering dampener. The RBK sku listed is for the mounting kit only. Be sure to order this AND the steering stabilizer part number RSSC.

Instructions:	PDF
Additional info:	Class A
Vehicle type:	Class A
Drilling required:	no
Replace OEM bar:	no
Installation time:	1 hr

CTruTrac

Learn more about our TruTrac bars

A Trac bar eliminates axle play from side-to-side.

— No results. —