FitMaster Suspension Systems Product Match
2025 Freightliner S2RV
2025 Freightliner S2RV
AAnti-Sway Bar Info
Learn more about our Anti-Sway Bars
Controlling sway helps stabilize a vehicle's side-to-side motion and gives maneuverability when cornering. If you are only installing one bar, it is recommended to start with a rear anti-sway bar.
Front
Front anti-sway bar 1-3/4 inch diameter and Trac Bar combo For 10k and 12k front axles only. Fits aftermarket Sumo springs.
| Instructions: | |
| Vehicle type: | Class A |
| Drilling required: | no |
| Replace OEM bar: | no |
| Installation time: | 1 hr |
Front anti-sway bar 1-3/4 inch diameter. For 10k and 12k front axles only. Fits aftermarket Sumo springs.
| Instructions: | |
| Vehicle type: | Class A |
| Drilling required: | no |
| Replace OEM bar: | no |
| Installation time: | 1½ hr |
Rear
Rear anti-sway bar 2-inch diameter. Factory replacement.
| Instructions: | |
| Vehicle type: | Class A |
| Drilling required: | yes |
| Replace OEM bar: | yes |
| Installation time: | 2 hr |
Subcomponents
— No results. —
BSteering Stabilizers
Learn more about our Steering Stabilizers
Roadmaster steering stabilizers provide an immediate and dramatic improvement in handling and control. Please note: A complete Steering Stabilizer system consists of a mounting kit and the stabilizer unit. Be sure to order both. The part numbers are shown below.
Reflex Steering Stabilizer only. You will also need to order a corresponding RBK mounting kit in order to install this product.
| Instructions: | |
| Vehicle type: | Class A |
| Drilling required: | no |
| Replace OEM bar: | no |
| Installation time: | ½ hr |
This SKU is for the mounting kit only. Be sure to order this AND a steering stabilizer.
| Instructions: | |
| Vehicle type: | Class A |
| Drilling required: | no |
| Replace OEM bar: | no |
| Installation time: | 1 hr |
This is a heavy-duty Exact Center Steering Stabilizer recommended for chassis weight ratings over 22k lbs. It is intended for large Class As, Super Cs and buses but can also be used on lighter chassis applications. Whichever stabilizer you choose, you will need to order a corresponding stabilizer mounting kit in order to install this product.
| Instructions: | |
| Vehicle type: | Class A |
| Drilling required: | yes |
| Replace OEM bar: | no |
| Installation time: | ½ hr |
This is a medium-duty Exact Center Steering Stabilizer for chassis weight ratings under 22k lbs. It is intended for smaller Class As, Super Cs and buses. For additional steering resistance, order the 481300A. Whichever stabilizer you choose, you will also need to order a corresponding stabilizer mounting kit in order to install this product.
| Instructions: | |
| Vehicle type: | Class A |
| Drilling required: | yes |
| Replace OEM bar: | no |
| Installation time: | ½ hr |
CTruTrac
Learn more about our TruTrac bars
A Trac bar eliminates axle play from side-to-side.
Front Trac Bar.
| Instructions: | |
| Vehicle type: | Class A |
| Drilling required: | no |
| Replace OEM bar: | no |
| Installation time: | 1 hr |
What is a Direct-Connect Baseplate?
What is a Crossbar-Style Baseplate?