FitMaster Suspension Systems Product Match

2025 International MV Series

Quick Menu

A Anti-Sway Bar Info

B Steering Stabilizers

C TruTrac

AAnti-Sway Bar Info

Learn more about our Anti-Sway Bars

Controlling sway helps stabilize a vehicle's side-to-side motion and gives maneuverability when cornering. If you are only installing one bar, it is recommended to start with a rear anti-sway bar.

Front

Front sway bar 1 3/4 diameter. Fits MV607 only. Please measure front spring hangers outside width passenger forward B755 bracket needs to be 6-5/8". Forward drivers bracket B660 outside width needs to be 4-3/4". If both measure 4-3/4" please use the 1179-132 correct sway bar kit.

Instructions:	PDF
Vehicle type:	Class A
Drilling required:	no
Replace OEM bar:	no
Installation time:	2 hr

Rear

Rear sway bar 1 3/4 diameter. Fits MV607 only.

Instructions:	PDF
Vehicle type:	Class A
Drilling required:	yes
Replace OEM bar:	no
Installation time:	2 hr

Subcomponents

— No results. —

BSteering Stabilizers

Learn more about our Steering Stabilizers

Roadmaster steering stabilizers provide an immediate and dramatic improvement in handling and control. Please note: A complete Steering Stabilizer system consists of a mounting kit and the stabilizer unit. Be sure to order both. The part numbers are shown below.

Reflex Steering Stabilizer only. You will also need to order a RBK mounting kit in order to install this product. For MV607 only.

Instructions:	PDF
Vehicle type:	Class A
Drilling required:	no
Replace OEM bar:	no
Installation time:	1 hr

This SKU is for the mounting kit only. Be sure to order this AND a steering stabilizer. For MV607 only.

Instructions:	PDF
Vehicle type:	Class A
Drilling required:	yes
Replace OEM bar:	no
Installation time:	1 hr

This is a heavy-duty Exact Center Steering Stabilizer recommended for chassis weight ratings over 22k lbs. It is intended for large Class As, Super Cs and buses but can also be used on lighter chassis applications. Whichever stabilizer you choose, you will also need a stabilizer mounting kit. Fits MV607 only.

Instructions:	PDF
Vehicle type:	Class A
Drilling required:	yes
Replace OEM bar:	no
Installation time:	1 hr

CTruTrac

Learn more about our TruTrac bars

A Trac bar eliminates axle play from side-to-side.

— No results. —