FitMaster Suspension Systems Product Match

2002 Chevrolet 3500 Cutaway

2002
Quick Menu
A Anti-Sway Bar Info
B Steering Stabilizers
C TruTrac

AAnti-Sway Bar Info

Learn more about our Anti-Sway Bars

Controlling sway helps stabilize a vehicle's side-to-side motion and gives maneuverability when cornering. If you are only installing one bar, it is recommended to start with a rear anti-sway bar.

Front

— No results. —

Rear
Item #1109-175
Rear sway bar 1 1/2 diameter.
Instructions: PDF
Additional info: Class C, Van & Cutaway
Vehicle type: Class C
Drilling required: yes
Replace OEM bar: no
Installation time: 1½ hr
Notes:
  • Chassis built before June of 2007 will require an additional axle mounting bracket kit part #590061-00.
Item #1109-150
Rear sway bar 1 3/8 diameter.
Instructions: PDF
Additional info: Van & Cutaway
Vehicle type: Cutaway/Van
Drilling required: yes
Replace OEM bar: no
Installation time: 1½ hr
Notes:
  • Chassis built before June of 2007 will require an additional axle mounting bracket kit part #590061-00.
Subcomponents
Item #590150-00
Rear replacement end link kit only.
Instructions: PDF
Additional info: Van & Cutaway
Vehicle type: EV Type 3
Drilling required: no
Replace OEM bar: no
Installation time: ½ hr
Item #590150-00
Rear replacement end link kit only.
Instructions: PDF
Additional info: Van & Cutaway
Vehicle type: Cutaway/Van
Drilling required: no
Replace OEM bar: no
Installation time: ½ hr
Item #590061-00
Chassis built before June of 2007 will require this axle mounting bracket kit when installing 1109-150.
Instructions: PDF
Additional info: Van & Cutaway
Vehicle type: Cutaway/Van
Drilling required: yes
Replace OEM bar: no
Installation time: 1½ hr

BSteering Stabilizers

Learn more about our Steering Stabilizers

Roadmaster steering stabilizers provide an immediate and dramatic improvement in handling and control. Please note: A complete Steering Stabilizer system consists of a mounting kit and the stabilizer unit. Be sure to order both. The part numbers are shown below.

Item #RSSC
Reflex Steering Stabilizer only. You will also need to order a corresponding RBK mounting kit in order to install this product.
Instructions: PDF
Additional info: Cutaway
Vehicle type: Cutaway/Van
Drilling required: no
Replace OEM bar: no
Item #RBK15
The RBK sku listed is for the mounting kit only. Be sure to order this AND the steering stabilizer part number RSSC.
Instructions: PDF
Additional info: Cutaway
Vehicle type: Cutaway/Van
Drilling required: no
Replace OEM bar: no
Installation time: 1 hr

CTruTrac

Learn more about our TruTrac bars

A Trac bar eliminates axle play from side-to-side.

— No results. —