Search Again
FitMaster Suspension Systems Product Match
2020 Ford E450
AAnti-Sway Bar Info
Controlling sway helps stabilize a vehicle's side-to-side motion and gives maneuverability when cornering. If you are only installing one bar, it is recommended to start with a rear anti-sway bar.
Learn more about our Anti-Sway Bars
Front
Item #1139-176 Front sway bar 1 3/8 diameter for RVs.
| Instructions: | |
| Additional info: | Class C |
| Vehicle type: | Class C |
| Drilling required: | no |
| Replace OEM bar: | yes |
| Installation time: | 1 hr |
Rear
Item #1139-197 Rear sway bar: 1 1/2 diameter. For applications with auto chains.
| Instructions: | |
| Additional info: | Class C |
| Vehicle type: | Class C |
| Drilling required: | yes |
| Replace OEM bar: | yes |
| Installation time: | 1 hr |
- Will work on the new 6 liter diesel engine for E450 chassis 1997-on. Mounts to axle same as factory bar.
Item #1139-147 Rear sway bar: 1 1/2 diameter. For applications without auto chains.
| Instructions: | |
| Additional info: | Class C |
| Vehicle type: | Class C |
| Drilling required: | yes |
| Replace OEM bar: | yes |
| Installation time: | 1 hr |
- Will work on the new 6 liter diesel engine for E450 chassis 1997-on. Mounts to axle same as factory bar.
Subcomponents
Item #590184-00 Front replacement end link kit only.
| Instructions: | |
| Vehicle type: | Class C |
| Drilling required: | no |
| Replace OEM bar: | no |
| Installation time: | 1 hr |
BReflex Steering Stabilizers
A Steering Stabilizer ensures a fast return-to-center in crosswinds or an oversteer situation. Please note: A complete Reflex Steering Stabilizer system consists of a mounting kit and a steering stabilizer. Be sure to order both. The part numbers are shown below.
Learn more about Reflex Steering Stabilizers
Item #RSSC Steering Stabilizer only. You will also need to order a corresponding RBK kit in order to install this product.
| Instructions: | |
| Additional info: | Class C |
| Vehicle type: | Class C |
| Drilling required: | no |
| Replace OEM bar: | no |
| Installation time: | 1 hr |
Item #RBK24 The RBK sku listed is for the mounting kit only. Be sure to order this AND the steering stabilizer part number RSSC.
| Instructions: | |
| Additional info: | Class C |
| Vehicle type: | Class C |
| Drilling required: | no |
| Replace OEM bar: | no |
| Installation time: | 1 hr |
CDavis TruTrac
A Trac bar eliminates axle play from side-to-side.
Learn more about Davis TruTrac Bars
— No results. —
DOEM Wiring
Not available at this time.